Fume Hoods

AvailabilityIn Stock
CategoryFume Hoods
Payment MethodsCash, COD, DirectDebit
Rated 0.0/5 based on 0 customer review
5
0
0%
4
0
0%
3
0
0%
2
0
0%
1
0
0%

Fume Hoods Details

Purpose. Chemical fume hoods, when used properly, are one of the most reliable engineering controls in the laboratory. They protect workers by: Containing vapours, dusts, gases, and fumes generated within the hood, and removing them as air flows into the hood and then out via the laboratory exhaust system. Scientists carry out lots of experiments in laboratories and a number of them may be dangerous. Poisonous gasses are constantly a hassle in these laboratories. So here a fume hood (or a fume cupboard or fume cupboard) is a handy and must-have solution.

The Fume hood is an incumbent for research center work gear with a framed in the area on top that can contain the impacts of the trial being run inside it. It is intended to guarantee well-being for the client and different occupants of the room, and it ought to have the option to sift through any unsafe gasses. The Fume Hood may likewise give security from little blasts or sprinkles. It has an implicit system to emphatically drain the gasses out of the functioning region inside the framed area.

Especially, a Fume Hood is a huge box on top of a lab workbench. This case has an enormous exit way or shade at the front side and might have a glass or CRCA sheet dividers on different sides. Assuming you want to carry a risky experiment of test on top of an island-type lab table, then, at that point, you really want a glass-walled chamber or probably a divider confronting metal smoke wall is fine for the safety of test. As the need might arise to drain the air out of the case, it, by and large, an exhaust fan or pneumatic machine inside it over the work space, and a fixed vent pipe associated with it that goes to the external climate, or to a channel block. There are a few sorts of Fume Hoods that needn’t bother with a vent or air channels we’ll cover them soon.

Purpose. Chemical fume hoods, when used properly, are one of the most reliable engineering controls in the laboratory. They protect workers by: Containing vapours, dusts, gases, and fumes generated within the hood, and removing them as air flows into the hood and then out via the laboratory exhaust system. Scientists carry out lots of experiments in laboratories and a number of them may be dangerous. Poisonous gasses are constantly a hassle in these laboratories. So here a fume hood (or a fume cupboard or fume cupboard) is a handy and must-have solution.

The Fume hood is an incumbent for research center work gear with a framed in the area on top that can contain the impacts of the trial being run inside it. It is intended to guarantee well-being for the client and different occupants of the room, and it ought to have the option to sift through any unsafe gasses. The Fume Hood may likewise give security from little blasts or sprinkles. It has an implicit system to emphatically drain the gasses out of the functioning region inside the framed area.

Especially, a Fume Hood is a huge box on top of a lab workbench. This case has an enormous exit way or shade at the front side and might have a glass or CRCA sheet dividers on different sides. Assuming you want to carry a risky experiment of test on top of an island-type lab table, then, at that point, you really want a glass-walled chamber or probably a divider confronting metal smoke wall is fine for the safety of test. As the need might arise to drain the air out of the case, it, by and large, an exhaust fan or pneumatic machine inside it over the work space, and a fixed vent pipe associated with it that goes to the external climate, or to a channel block. There are a few sorts of Fume Hoods that needn’t bother with a vent or air channels we’ll cover them soon.

TYPES OF FUME HOOD

1. Bench Type Fume Hood

For the most part fume hoods are fundamental in research centers to safeguard the soundness of anybody working in the lab. So The discharges made by lab analyses and research can be hazardous and should be eliminated securely. Likewise With seat fume hoods, benches and larger than usual articles in your lab will have the ventilation important for a protected workplace.

2. Low Bench Type Fume Hood

We makes it simple for you to get the low bench type you want introduced and affirmed rapidly. Our lab furniture specialists remove all of the work from purchasing low bench fume hoods so you can sit back, take in the natural air, and unwind. We have introduced low seat rage hoods across the world for labs, all things considered, going from schools to proficient exploration offices.

3. Walk in Type Fume Hood

For high volume responses or pilot plant responses call for high tallness stroll in kind of walk in type fume hoods. Despite the fact that we have standard sizes of stroll in fume hoods in our item range, at Care Equipment we endeavor to oblige client’s particular prerequisites.

Technical Specifications

ParameterSpecification
MOCMild Steel / Stainless Steel
STD Sizes1200mm I 1800mm I 2400mm (L) X
915mm (W) X 2300mm (H)
Body StructureBody Structure made from 18SWG (1.2mm) CRCA,
Inner lining of Rear & top baffles in 6mm thick
phenolic resin construction should be chemical &
heat resistant with smooth finish.
Base CabinetShutters with Shelves 18SWG (1.2mm) CRCA
Working TopBlack Jet Granite 20mm with 20mm skirting covered, 1No. oval shaped cup sink in PP for drainage water.
Shash5mm Toughened glass with vertical rising shutter
Air foilAerodynamic Type
ValvesAir / Nitrogen / Vaccum / Water
Duct DamperMin 200mm Diameter in PP construction complete with flanges with both sides & manual operation handle.
Electric Panel5A MCB Switch For Fluorescent Light 5A / 16A MCB Switches & sockets

Warranty and Service Support

We provide 1 year manufacturing warranty from the date of dispatch, We believe in best of the quality and after-sales service support.

Areas of Application

  • Pharmaceutical Industries
  • Hospitals and Medial
  • Microbiology Laboratories
  • Chemical Research Laboratories
  • Food Processing Industries
  • Electronics Industries

Related Products

Static Pass Box

Static Pass box is one of the cleanroom system or equipment, which is used to transfer the material from one side to oth... Continue

Dynamic Pass Box

Dynamic Pass box is used to transfer the materials from one side to other side through a controlled environment in order... Continue

Vertical Laminar Airflow Unit

Vertical Laminar Air Flow Unit is a cabinet fitted with a HEPA filtered airflow system. Here, laminar means a unidirecti... Continue

Horizontal Laminar Airflow Unit

Horizontal Laminar Air Flow Unit is a cabinet fitted with HEPA filtered air flow system. Here, laminar means unidirectio... Continue

Laminar Airflow Unit (Workstation)

Laminar Airflow Unit (Workstation) is a cabinet fitted with a HEPA filtered airflow system. Here, laminar means a unidir... Continue

Sampling And Dispensing Booth

Sampling and Dispensing booth is a kind of laminar flow filtration cabin that is employed in dispensing, sampling, and w... Continue

Mobile LAF Trolley

Care Equipment Mobile Trolley (Mobile Laminar Airflow Unit) is designed for transporting sterile products like Rubber St... Continue

Laboratory Furniture

Care Equipment is a producer and provider of laboratory furniture, lab furniture, and modular lab furniture based in Ind... Continue

Biosafety Cabinet

Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial lab... Continue

Cleanroom Air Shower And Tunnel

Air shower is a two doors walk-through dust removal system, which is fitted prior to cleanroom entrance. The purpose of ... Continue

Sterile Garment Storage Cubicle

Sterile Garment Storage Cabinet is one essential equipment in any clean room. It is used to keep cleanroom garments, too... Continue

De Dusting Tunnel

The De-Dusting Booth system is used to remove the loose particles/dust present on the receiving materials, which will be... Continue

Air Curtains

An air curtain is a device that can effectively separate two different environments without the need for a solid doorway... Continue

Storage Cabinet

Care Equipment feels massive joy in presenting Itself as trail blazers and Global Leader in assembling and trading of Wa... Continue


Request For Quotation
Location
B-10, Nakshtra Industrial Hub 2, Near KP Estate, Bakrol Gatrad Road, Bakrol-Bujrang,,
Ahmedabad - 382430
Gujarat (India)
MoTuWeThFrSaSu
Closed9:00 AM To 8:00 PM
Care Equipment
All rights reserved - Copyright © 2024 - Powered by
4allBIZ
Request a Call Back!